5 Essential Tips to Maintain Your BMW Motorcycle

Many riders tend to overlook the premature wear-out of their motorcycles, but it’s never a good idea to turn a blind eye. Your BMW motorcycle can fall into disrepair with poor upkeep and even stop working properly, and you don’t want that happening to you.

After all, preventative maintenance is easier to skip over than getting your motorcycle fixed, but will cost you dearly in the long run. Your BMW motorcycle is a significant investment, and you need to take care of it to make it last for longer.

At Cross Country Cycle, we have honest motorcycle technicians who can care for your every need. Whether it’s a complicated job on a new motorcycle or just an oil change, stop by our service center, or contact us today. We are your go-to shop for your BMW motorcycle dealer in Metuchen.

BMW Motorcycles

Congratulations on your new BMW Motorcycle! You are now part of a fraternity of riders who have been enjoying the thrill of riding for decades. The world is yours to explore and experience with BMW Metuchen.

With a little bit of knowledge and TLC, your BMW motorcycle can be around to share countless miles with you. If you are looking for a BMW dealer near me, you’re in the right place! Cross Country Cycle is a Ducati and BMW dealer in Metuchen. There are a few simple things you should know about maintaining your bike.

1. Check Tires for Damage

Your tires are the only thing connecting you to the ground, and they need to be checked before every ride for cuts, bulges, and damage. Tires should be inspected for tread depth as well.

It’s best to check tire pressure when cold (have been sitting for 3 hours or more). If you do not have access to a tire pressure gauge, take your bike to a dealership or gas station with an air machine.

2. Inspect Brakes and Lines

Always ensure that your brake pads are not worn out by checking them regularly. Brake fluid should be topped up when needed as well. Remember that brakes are safety-critical components of your motorcycle, so they must always be in excellent condition at all times! Check brake fluid levels as well — if you’re low on brake fluid, it’s time to get your brakes replaced.

3. Clean and Lube Chain

If you don’t clean and lube your BMW’s chain, it will wear out much faster than it should. The chain is essentially a roller bearing, just as the wheel bearings on your bike are roller bearings. If you don’t lubricate the chain, it will wear out much quicker than if you do.

A dirty chain can also be a safety issue for you. The dirt that accumulates on the chain can eventually get into the rear wheel bearings and other suspension parts. The dirt can act like sandpaper and gradually wear away at these components until they break down completely.

4. Inspect Coolant and Hoses

Cooling system maintenance is probably the most overlooked service on a motorcycle. It’s also the most important because if that system fails, you’re more likely to end up on the side of the road than with any other mechanical failure. It’s easy to check the level of your coolant, and if it’s low, you need to find out why.

5. Change Oil and Filter

Oil is the lifeblood of your engine, and you must change it regularly to keep it running smoothly and efficiently for many years. It’s best to follow the manufacturer’s maintenance schedule to change oil and filter (every 5,000 miles or so).

Cross Country Cycle for Your BMW Needs

Owning a BMW motorcycle is an expensive endeavor, and the last thing you want to do is ruin your investment. Take some time on proper maintenance of your bike. You’ll be glad you did.

We are a BMW motorcycle dealer in Metuchen. Follow our advice at Cross Country Cycle for routine maintenance and check-ups for your BMW motorcycle and discover why our customers have been with us for years.